Public toilets?

[AC-130 Above]

@Rabbit2047 what is your take on this? In comparison to the Binary trigger. My Franklin Armory lower pine like to walk out when I’m using That lower, I was finna get some anti walk pins but this article is saying it’s bad for the gun?

Why not to use Anti-Walk/Anti-Rotation hammer/trigger pins in your AR/M16

Below is the article written by Chad Albrecht of SOTAR (School of the American Rifle), it's a very insightful read. 1) The use of Anti Walk/Anti Rotation pins shows the Manufacturer of these devices and the consumers who buy them dont understand how the AR15 or M16 trigger mechanism is designed...

www.theoutdoorstrader.com

 

[KERTWOOD]

@Rabbit2047 what is your take on this? In comparison to the Binary trigger. My Franklin Armory lower pine like to walk out when I’m using That lower, I was finna get some anti walk pins but this article is saying it’s bad for the gun?

Why not to use Anti-Walk/Anti-Rotation hammer/trigger pins in your AR/M16

Below is the article written by Chad Albrecht of SOTAR (School of the American Rifle), it's a very insightful read. 1) The use of Anti Walk/Anti Rotation pins shows the Manufacturer of these devices and the consumers who buy them dont understand how the AR15 or M16 trigger mechanism is designed...

www.theoutdoorstrader.com

Yawn...

 

[AC-130 Above]

Yawn...

Was that too big of a noob question

 

[Fast306stang]

Everybody cats O.K.? Cat count?

 

[Okuma]

Yawn...

My feelings too.
Maybe someone needs to make a pin set that will still rotate but not walk out. Rounded rivet head on one side, with a countersunk washer secured with a bolt on other. Would allow rotation but not walk out.

My feeling with dealing with equipment, if the pin is moving, it’s wearing the hole and the pin. Will eventually get wallered out and nothing will fit right.

Excavator pins are captured and will not move.

 

[Okuma]

Kind of apples to oranges, but the physics are there.

 

[AC-130 Above]

That’s a big ole kitty kat

View attachment 95422

 

[slapshut]

Dang, I am trying to sell one and monitoring prices every where in the known and unknown universe. This one here was a pretty good deal------------------

Norinco SKS Sporter 7.62x39 with extras - Semi Auto Rifles at GunBroker.com : 875019851

Buy Norinco SKS Sporter 7.62x39 with extras: GunBroker is the largest seller of Semi Auto Rifles Rifles Guns & Firearms All

www.gunbroker.com

 

[AC-130 Above]

My feelings too.
Maybe someone needs to make a pin set that will still rotate but not walk out. Rounded rivet head on one side, with a countersunk washer secured with a bolt on other. Would allow rotation but not walk out.

My feeling with dealing with equipment, if the pin is moving, it’s wearing the hole and the pin. Will eventually get wallered out and nothing will fit right.

Excavator pins are captured and will not move.

Do you think it makes a difference in the brand of the push pins?

 

[slapshut]

Hippie cat on hippie blanket.

 

[Miles]

Why not to use Anti-Walk/Anti-Rotation hammer/trigger pins in your AR/M16

Below is the article written by Chad Albrecht of SOTAR (School of the American Rifle), it's a very insightful read. 1) The use of Anti Walk/Anti Rotation pins shows the Manufacturer of these devices and the consumers who buy them dont understand how the AR15 or M16 trigger mechanism is designed...

www.theoutdoorstrader.com

@Rabbit2047 design AR pins that use AK style retaining plate or a shepherd's hook.

 

[2Glocks]

How did the run go?

went great!Averaged 10:30 miles, super sore today lol

 

[2Glocks]

How did the run go?

 

[Fast306stang]

That’s a big ole kitty kat

He's about 14 pounds. He turned a year old July 30...should be close to 20 pounds when he's fully grown. Can't wait!

 

[slapshut]

I have study pin rotation on AKs and my conclusion is I do not like pin rotation, but sometimes it will not go away with fitting and even a stronger shepards hook or other device. On the factory Romanian pistols, which have a 100% Romanian everything, the pins do not move. On most factory rifle, the pins do not move.

 

[Fast306stang]

Why not to use Anti-Walk/Anti-Rotation hammer/trigger pins in your AR/M16

Below is the article written by Chad Albrecht of SOTAR (School of the American Rifle), it's a very insightful read. 1) The use of Anti Walk/Anti Rotation pins shows the Manufacturer of these devices and the consumers who buy them dont understand how the AR15 or M16 trigger mechanism is designed...

www.theoutdoorstrader.com

@Rabbit2047 design AR pins that use AK style retaining plate or a shepherd's hook.

I believe standard AR pins are held in by the trigger and hammer springs?

 

[Knight]

Is the thread really gonna talk about anti rotating pins today?

 

[Fast306stang]

Is the thread really gonna talk about anti rotating pins today?

 

[AC-130 Above]

Is the thread really gonna talk about anti rotating pins today?

Yes you know I always start the dumb shit

 

[Knight]