Question about Lee reloading dies?

Faktory 47

PewPewPewCo

Sniper
Mar 23, 2015
2,139
1,075
113
Georgia
When I got my press it came with these dies in 9mm. They work fine
3ac283de73ed795f98e4cc701b9a0a01.jpg


I bought 44 mag dies and they don't have that adapter/collar. Without the collar they are to small to thread into my press.
5074f944ffe1c38e6586ba325f0c32f7.jpg


Am I buying the right dies for my reloader? Do they all require that adapter?
 

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
You can take the adaptors off the 9 dies and put them on the .44 dies. It is the press that requires the adaptors, no main stream manufacturer produces dies with that size body.
 

Liberty

nitrocellulose dispenser
Site Supporter
Mar 27, 2015
697
612
113
Ga
Zip code
31901
76 makes a great point. I don't set up my progressive that takes Hornady bushings for less than 500 rounds, and there is always tweaking the powder measure/ expander between calibers. After running 500 to 1500 rounds I break the dies down for cleaning. If I were using those on a single stage or turret press, and only loading 100 or 200 at a setting there is no way I would want to reset them every use.
 

PewPewPewCo

Sniper
Mar 23, 2015
2,139
1,075
113
Georgia
76 makes a great point. I don't set up my progressive that takes Hornady bushings for less than 500 rounds, and there is always tweaking the powder measure/ expander between calibers. After running 500 to 1500 rounds I break the dies down for cleaning. If I were using those on a single stage or turret press, and only loading 100 or 200 at a setting there is no way I would want to reset them every use.
I really need someone to come out and teach me how to reload and the finer points of tweaking my set up.

I'm just knocking primers out and tumbling brass right now
 

freedom

Sniper
Mar 25, 2015
1,522
885
113
Covington, Ga
Zip code
30014
Need some help there, what's that?
After I thought about it, that's not what I was thinking of.

I haven't seen a press that needs the adapters that you have. Maybe you could leave one of the sleeves permanently installed in your press and thread the dies into it.

Edit. Never mind, you got the right answer.
 

Buckeye76

Frontiersman
Mar 27, 2015
254
144
63
Georgia
I really need someone to come out and teach me how to reload and the finer points of tweaking my set up.

I'm just knocking primers out and tumbling brass right now


That's ok. I deprimed and cleaned several thousands of pieces of brass before I worked up the nerve to start loading it.
 

calebp

Hunter
Mar 24, 2015
41
19
28
United States
I really need someone to come out and teach me how to reload and the finer points of tweaking my set up.

I'm just knocking primers out and tumbling brass right now

If you wanna come down sometime I have been loading up a really sweet 147gr round. Be more than happy to let you hear it and show you the basics of reloading. Those first couple of rounds were nerve racking but I don't think I'll ever shoot factory stuff again after hearing handloads
 

Mac11FA

Disgruntled large member
Super Moderator
Lifetime Supporter
Patriot Lifetime
Mar 26, 2015
3,840
3,011
113
Locust Grove, GA
Zip code
30248
I need to get into reloading. Right after I get my garage cleaned out.