Southeast Traders Apparel Swag Store

What do you do

  • Hover

    Votes: 3 12.5%
  • Wipe and sit

    Votes: 10 41.7%
  • Birdnest

    Votes: 5 20.8%
  • eww, i'm to uppidy to use a public tiolet

    Votes: 6 25.0%

  • Total voters
    24

Tedkennedy

Omnivore
Site Supporter
Kalash Klub
May 17, 2016
2,266
13,609
113
Oklahoma
Zip code
74066
Cool. What should I get at Home Depot to replicate that high or even a low gloss finish? I’m guessing the process is, you sand it down to the grain/unfinished then stain it and then add the gloss finish?

I like Formsby's, if you want to go pro-grade, look at some of the stuff Brownell's sells.
First, watch some videos on refinishing stocks - I think the one I had was AGI gunsmithing.
Second - the higher the gloss, the more imperfections will show
Third - make sure you progressively get finer with your sanding (using a block!)
Fourth - when you think you're done, get the raw wood surface damp, then hit it with a hair dryer. You'll see little whiskers come up. Remove those with 00000 steel wool. Your raw surface should now be ready.
Fifth - whatever finish you choose, dilute it about half or more with thinner. Apply evenly, it'll dry quickly. After you get a good layer on, steel wool again, then wipe down gently, use compressed air if you have it. Continue applying layers until you think you're there, then apply one final coat undiluted.

Then post pics here of the final product.
 

2Glocks

Off base and off line
Site Supporter
Kalash Klub
Aug 30, 2019
7,882
48,950
113
Your Mother’s House
Zip code
69696
Nope, just like some punch !


Well then:
giphy.gif