What buffer extension and buffer and spring are you using ?
Foreign Weapons and Obscure Builds V3
- Thread starter KhyberPass
- Start date
What buffer extension and buffer and spring are you using ?
Mercedes Chrysler Diamler
Yes, they will fit, they are OG CetmeL. Question is if they work. Spanish STANAG mags are a few levels below ProMags. At joint wargames, Spaniards used to beg other NATO troops for their mags.@Miles
Don't know if these would work in your marcolmar but got this in an email today:
CETME L, LC, LV SURPLUS 5.56x45mm 30-Round Magazine
Steel body construction Steel spring and follower Heavily used conditiongunmagwarehouse.com
What mags are preferred for the Cetme L? seems like metal AR mags seem to fit.
I may or may not have purchased one
I’m using the aero enhanced buffer, with standard spring and carbine buffer.
From ODT
?I have successfully used aluminum USGI, D&H, South Korean steel, Surefeeds, Lancer.
Put some electrical tape behind the ejection port. 2 strips high, about 3" long. Brass likes to hit the receiver on the way out.
Damn! That is a lot of info to absorb.
The 350L is ejecting at 2-230, so it over gassed according to sprinco. I’ll pull the H3 buffer from my SBR, and re-evaluate. If it moves the ejection to 3 o’clock, then h3 and orange spring should get to the 4 o’clock desired ejection.
What other witchcraft do usually possess.
That’s the easier on the list to fix ..
If that doesn’t work you polish bolt face and chamber from 11-1 o’clock and 7-5 o’clock smooth it out a bit.
Slowly load a round from the mag see if projectile is grabbing the front edge of the mag if so remove 1/16” so it doesn’t hang up when going into battery.
Then if still having issues then the extractor could be to tightly wound up. Disassemble it remove extractor and take out the o ring invert the spring upside down and reinstall carefully keeping it lined up properly yes there’s a jig for that too. That’s common issue with the aftermarket bolts especially with 458 Soccom.
That’s about all I got ...
- Jul 1, 2015
- 18,091
- 98,514
- 113
- Zip code
- 31028
You mean like I just ate some bomb ass Mexican food and came outside and it was raining so I sat down on a bench to wait for the rain to slow down and it did but I thought it would slow down more but now here I am in a torrential downpour and it's blowing rain under my shelter?
It just blew through here. Heavy rain.
- Jul 1, 2015
- 18,091
- 98,514
- 113
- Zip code
- 31028
- Jul 1, 2015
- 18,091
- 98,514
- 113
- Zip code
- 31028
I'm gonna have to make a run for it. Me and my phone are getting wet, and not in a good way either
Why you parked so far away
- Jul 1, 2015
- 18,091
- 98,514
- 113
- Zip code
- 31028
I just had a whole conversation in Spanish about the rain I'm assuming. I have no idea what he said, I just nodded, pointed and laughed
- Jul 1, 2015
- 18,091
- 98,514
- 113
- Zip code
- 31028
If you're asking that question, you don't know anything about me, tsk, tsk