Foreign Weapons and Obscure Builds V3

Faktory 47

lesptr

Ninja
Kalash Klub
Lifetime Supporter
Mar 7, 2018
9,150
46,119
113
Newnan, GA
Zip code
30263
These days unfortunately yes.

Thought about 6.5 Grendel but didn't want to add another cartridge to the corral.

I’ve been considering 6mm ARC.
I’ve been having feeding issues with my 350 legend, I believe to be caused by the gap at the upper’s m4 feed ramps and the barrel extension feed ramp.
It was creating a chisel effect that would shave copper off the fmj projectiles, slowing the cycling and not going into full battery.
I just disassembled the upper, pulled out the dremel and did some gun smiffin. Will see how it goes at the range, but seems to cycle smoothly now. Before and after pics.
e57f3bdf4624d5a3b03f9f5afcf590d9.png

fd4c54fb067d5f817cc1bc78a51d8e13.jpg



If this doesn’t work, I’ll buy a 6mm ARC barrel and give it a whirl.
 

T_Max

Master of the Meat
Super Moderator
Kalash Klub
Lifetime Supporter
Apr 30, 2015
8,317
41,920
113
NW GA
I’ve been considering 6mm ARC.
I’ve been having feeding issues with my 350 legend, I believe to be caused by the gap at the upper’s m4 feed ramps and the barrel extension feed ramp.
It was creating a chisel effect that would shave copper off the fmj projectiles, slowing the cycling and not going into full battery.
I just disassembled the upper, pulled out the dremel and did some gun smiffin. Will see how it goes at the range, but seems to cycle smoothly now. Before and after pics.
e57f3bdf4624d5a3b03f9f5afcf590d9.png

fd4c54fb067d5f817cc1bc78a51d8e13.jpg



If this doesn’t work, I’ll buy a 6mm ARC barrel and give it a whirl.
Looks canted
 

Jake

Steering wheel holder
Super Moderator
Kalash Klub
Lifetime Supporter
Aug 11, 2015
8,361
36,820
113
Ball Ground
Zip code
30189
I’ve been considering 6mm ARC.
I’ve been having feeding issues with my 350 legend, I believe to be caused by the gap at the upper’s m4 feed ramps and the barrel extension feed ramp.
It was creating a chisel effect that would shave copper off the fmj projectiles, slowing the cycling and not going into full battery.
I just disassembled the upper, pulled out the dremel and did some gun smiffin. Will see how it goes at the range, but seems to cycle smoothly now. Before and after pics.
e57f3bdf4624d5a3b03f9f5afcf590d9.png

fd4c54fb067d5f817cc1bc78a51d8e13.jpg



If this doesn’t work, I’ll buy a 6mm ARC barrel and give it a whirl.

Were you blindfolded when you were dremeling?















:behindsofa: just kidding. Hope it works out for ya.