Foreign Weapons and Obscure Builds V3

American Revival Apparel Company

AC-130 Above

WTB: SVT-40
Kalash Klub
Oct 14, 2019
8,045
37,497
113
Newnan
Zip code
30263
1st choice Liqui Moly Valve clean
2nd choice Gumout High mileage or Techron. Make sure that you use enough cleaner for your size tank.

MMO soak:
Pull out the spark plugs. Put about an ounce of MMO in each cylinder. Cover the holes with rags or put plugs back in loosely, just to keep crud out of the engine. Leave MMO in overnight.
Next day pull the plugs back out and cover the holes with a heavy towel/rag. Turn engine over by hand. MMO will shoot out of the plug holes. Do it a few times. Put plugs in, start the engine. @dial1911 Am I forgetting anything?

If you are not at the max fill line on the dipstick, add MMO to your oil and drive a 100 miles. MMO is a gentle cleaner, It will lower viscosity of your oil, but not by much. IIRC it is about 20w viscosity. MMO in the oil will clean the lower motor end.

Change oil. I would using a high mileage oil or better yet, add LiquiMoly Motor Oil Saver to regular oil.
I have bookmarked this and all other posts on this topic. Thanks guys, I really appreciate it!
 

Okuma

Proprietor
Kalash Klub
Lifetime Supporter
Oct 26, 2016
4,704
23,978
113
.
Zip code
30115
Found my next gun!