Adams Arms

GA Firing Line
AtlMedic

AtlMedic

Not A Doctor
Mar 25, 2015
2,644
1,441
113
Smyrna, GA
Zip code
30082
I was at Ga Firing line yesterday looking around. They had an Adams Arms AR I really liked. I had never thought much about piston guns but the guy at the store pointed out that the lack of gas blowing out of the chamber might be a benefit to me ( I shoot rifles and shot guns left handed). All the reviews I can find online seem good. I was wondering if anyone here had any experience with them?
 
Strider12

Strider12

Sniper
Lifetime Supporter
Mar 25, 2015
1,639
897
113
Atlanta
Zip code
30341
AtlMedic said:
I was at Ga Firing line yesterday looking around. They had an Adams Arms AR I really liked. I had never thought much about piston guns but the guy at the store pointed out that the lack of gas blowing out of the chamber might be a benefit to me ( I shoot rifles and shot guns left handed). All the reviews I can find online seem good. I was wondering if anyone here had any experience with them?
Click to expand...
How was the weight? The one I handled was HEAVY.
 
Optimus Prime

Optimus Prime

Hunter
Nov 19, 2015
19
16
3
ATL
you're welcomed to shoot my AA, you just need to bring (factory) ammo and meet me at a range local to me (Gwinnett area).
 

Attachments

  • 20150821_184155.jpg
    20150821_184155.jpg
    57 KB · Views: 16
dougiemac

dougiemac

Lord of Chaos
Owner
Lifetime Supporter
Aug 26, 2014
3,140
3,695
113
North Georgia
AtlMedic said:
I was at Ga Firing line yesterday looking around. They had an Adams Arms AR I really liked. I had never thought much about piston guns but the guy at the store pointed out that the lack of gas blowing out of the chamber might be a benefit to me ( I shoot rifles and shot guns left handed). All the reviews I can find online seem good. I was wondering if anyone here had any experience with them?
Click to expand...

I've met the founders / owners of Adams and did an interview with this along with The Hoss USMC at NRA Show last year. Great guys and SUPER smart about ballistics. They invented the 50 Beauwolf round.
 
  • Like
Reactions: madHatter
AtlMedic

AtlMedic

Not A Doctor
Mar 25, 2015
2,644
1,441
113
Smyrna, GA
Zip code
30082
dougiemac said:
I've met the founders / owners of Adams and did an interview with this along with The Hoss USMC at NRA Show last year. Great guys and SUPER smart about ballistics. They invented the 50 Beauwolf round.
Click to expand...

I've been hearing they have great Customer service. I think I'll probably get one of their rifles in a few weeks. I've been reading a lot of reviews and have yet to find anything rally bad about them.
 
boss_hawg

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
dougiemac said:
I've met the founders / owners of Adams and did an interview with this along with The Hoss USMC at NRA Show last year. Great guys and SUPER smart about ballistics. They invented the 50 Beauwolf round.
Click to expand...
Adams arms or Alexander arms?

they're different, right?
 
  • Like
Reactions: dougiemac
boss_hawg

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
I had an AA upper previously. actually I've had two of them now that I think about it...a 7.5 pistol and a 14.5 middy. both were fine...a bit heavier than a DI gun in the same configuration. also the piston setup limits aftermarket selection for hand guards and the such.

the recoil impulse is different. it feels softer because it seems to last longer. it's more of a push than the DIs snap.

I didn't own any cans while I owned the uppers so I can't comment there.

a couple of things I didn't like: heat and cleanliness. there are claims that the piston keeps the rifle cooler but I think this applies only to the bcg and upper. I really don't care how hot those get I don't want to reach in there unless I have to. also while it was cleaner the inside of the upper still gets dirty and needs cleaning. also the piston spouts excess gas of into/onto the inside of your hand guard. mine would almost melt the magpul that came with it.

I would rather have the heat inside of the gun rather than on my support hand.

my two units ran well but I went back to DI pretty quickly.
 
EugenFJR

EugenFJR

An anchor on a ship of fools.
Kalash Klub
Lifetime Supporter
Jul 3, 2015
4,564
16,321
113
Your mom's house
Zip code
90210
boss_hawg said:
Adams arms or Alexander arms?

they're different, right?
Click to expand...

Yes, I was looking at a Alexander arms 5.45x39 upper a few years ago. Looked very nice and had great reviews on line, it was just a little too rich for my blood.
 
EugenFJR

EugenFJR

An anchor on a ship of fools.
Kalash Klub
Lifetime Supporter
Jul 3, 2015
4,564
16,321
113
Your mom's house
Zip code
90210
I dont see any advantage of a piston upper over the DI upper. I have seen the BGC in a piston gun kind of rock from side to side in the upper, causing unusual wear in the upper ( I'm sure this is normal for a piston gun, it just looked odd.)

Also, what was the difference in price between the DI and piston gun?
 
AtlMedic

AtlMedic

Not A Doctor
Mar 25, 2015
2,644
1,441
113
Smyrna, GA
Zip code
30082
EugenFJR said:
I dont see any advantage of a piston upper over the DI upper. I have seen the BGC in a piston gun kind of rock from side to side in the upper, causing unusual wear in the upper ( I'm sure this is normal for a piston gun, it just looked odd.)

Also, what was the difference in price between the DI and piston gun?
Click to expand...

This one was on sale for 850. The only reason I'm leaning toward the piston gun is that I shoot lefty and like the idea of the gases not blowing in my face.
 
Hayata

Hayata

Blam-blam-blam-blam-blam-blam-blam-blam-PING!
Kalash Klub
Lifetime Supporter
Jul 5, 2015
6,135
30,134
113
Zip code
30022
I have the Adams Arms upper in 5.45x39. I bought it because at the time surplus ammo was like 13 cents/round but corrosive. I thought it would be smart to use a piston gun for corrosive ammo.

No issues, it shoots just fine. I have a bump-fire stock on it now and it'll stink up the range in no time.

If I'm not mistaken you can turn the gas off at the gas block.
 
AtlMedic

AtlMedic

Not A Doctor
Mar 25, 2015
2,644
1,441
113
Smyrna, GA
Zip code
30082
Hayata said:
I have the Adams Arms upper in 5.45x39. I bought it because at the time surplus ammo was like 13 cents/round but corrosive. I thought it would be smart to use a piston gun for corrosive ammo.

No issues, it shoots just fine. I have a bump-fire stock on it now and it'll stink up the range in no time.

If I'm not mistaken you can turn the gas off at the gas block.
Click to expand...
I know it has a setting for running suppressed, I don't know if it can be turned all the way off. I'll have to find someone with a can to try out on it sometime after I get it
 
Laces_Out_Marino

Laces_Out_Marino

Tracker
Trusted Trader
Aug 14, 2015
575
181
113
CANTON, GA
Zip code
30115
I have an AA and it is heavy, Thats why I have been building my own lowers and gonaa slap some lighter uppers on them to see how they do.As far as supressed, its pretty clean, with a piston gun you can also adjust how much gas is vented, Im still playing around with that function so I cant explain it all that well. I plan on keeping the gun but building other lighter ones too
 
  • Like
Reactions: Strider12
You must log in or register to reply here.
Top Bottom