Sionics Weapon Systems Lower Receiver - Initial Impressions

American Revival Apparel Company

DarthVader

Marksman
Mar 25, 2015
1,175
390
113
Henry County
Zip code
30253
For those of you who are unfamiliar with Sionics Weapon Systems, I thought I'd put up a mini-review with my initial impressions of a complete lower I just received from them. I ordered the lower during their 4th of July sale and it arrived yesterday. Yes, it took a little while. The reasons are simple. Sionics is based in Tucson, AZ and they are a relatively small manufacturer. They also cater more to Law Enforcement sales, which take priority over commercial sales. Contracts have due dates guys. ;) And I'm OK with that. On a side note, Sionics is the official rifle of the Atlanta Police Department. And they are currently delivering the last of more than 100 patrol rifles, SWAT SBRs and MGs.

Moving on, I count them among the few that are doing things right. Quality is comparable to BCM, Colt, Sons of Liberty Gun Works, etc. I often refer to them as the BCM you've never heard of and they are very similar to the early days of BCM. A small shop, putting out a great product that adheres to the milspec TDP where it really counts and improving on it where they can. Barrels and bolt carrier groups are fully mispec compliant in regard to materials used. However, they do a few things differently. All bolt carrier groups are NP3 coated, which I believe is superior to NiB. Barrels are not HPT tested. They are x-rayed and MPI tested. And they will be either 1/7 or 1/8 twist. All gas ports are correct sizes = NOT overgassed. Upper and lower assembly techniques are among the best in the industry. And all uppers and bolt carrier groups are test fired before shipping. And customer service is excellent. The owners are very active on M4C and respond to messages quickly. If you call them, one of the owners will probably answer the phone. And they respond to emails quickly too.

Prior to receiving this lower, I owned one other Sionics product, an 11.5" reduced gas port barrel designed primarily for suppressed shooting. And I've been very pleased with that barrel. It runs great. Additionally, I have attended the Sionics / Semper Paratus Arms Armorers Course, twice. I am not affiliated with them beyond that in any way and paid for this lower with my own, hard-earned cash. This is not a compensated review.

Now, on to the good stuff. Upon receiving the lower, it did not disappoint. Assembly is excellent, no marks or scratches, excellent staking on the castle nut and the Sionics NP3 trigger is very nice. Naturally, it's a little heavier than my Geissele triggers, but it's crisp with little to no creep. Overall, this lower represents a very good bargain, especially considering that it includes an A5 buffer system and an enhanced LPK. I was very happy to see that it used the A5SR as well, versus the standard A5 RE.

Standard features of the Sionics A5 lower are as follows:
Enhanced parts kit with NP3 coated trigger - similar to the BCM PNT LPK and the ALG Defense triggers.
QD receiver end plate - looks to be the B5 Systems version
Vltor A5 receiver extension and buffer system
Lower is standard 7075 forged - Type III anodized coating was very even and a nice dark black in color - no visible blems
All other lower parts are milspec, sourced from the same places as Colt, BCM, etc.
The supplied grip was a Tangodown model

One of the nice things about these lowers is that you can customize them to an extent. Want an ambi selector? No problem. With a stock or without, your choice. Price varies accordingly.

494a3c1a14c0574ebaa4fca0fa14451e.jpg


Of course, I had to make a few changes. So I installed the following:

Forward Controls EMR & ABC-RF
KAC ambi selector (from the spare parts box)
MOE grip (also from the spares box)
Swapped out the MOE trigger guard for an aluminum one
Added a Magpul MOE SL stock
Battle Arms EPS set - This was a trick, because the staking is so clean on the end plate, that I didn't want to break it loose. After I mentioned this on M4C, Steve sent me a PM almost immediately with instructions on how to swap the takedown pin without removing the endplate. I didn't ask, he contacted me. I thought that was pretty awesome.

The lower fits well with my other uppers. A very small amount of play, almost nonexistent. But the pins still push in and out without the use of tools, which is perfect in my book. Overall, I'm very happy with the quality of the lower so far and especially impressed with the service provided by Steve, Josh & Ryan out in Tucson.

Complaints:
The magwell could have a better bevel, but its comparable to Colt. Not as aggressive as DD and Noveske.
The magwell is also pretty tight fitting on my lower receiver block. BUT, USGI mags all dropped free and the 5 or 6 pmags I tried also dropped free. So, that's not really a complaint, but more of an observation. This is not an issue, as all mags I tried did drop free from the magwell. The mags do have less play in the magwell versus my BCM & KAC lowers.

And finally, pictures for all you folks that didnt want to read all that...
6a3de362e84379258907ac5fc405018f.jpg
46f2078270b75d6ad1789a1aafb6da9f.jpg
b9d3232686bfc963566cf0239f27d213.jpg
af8072701adf9b20e40f97e5a5ccc891.jpg
cf67ec7a54c9b86453e22e08a27bfd13.jpg
13048eb5831e5ce0b58734d90f5ab483.jpg
286110f763f82ede16e267820f9b3ff6.jpg

35f3a53b85eaefd2d5d8c9de676c67eb.jpg


And finally, the BAD Enhanced Pin Set. Installed without removal of the endplate.
Steve-0-;2370641 said:
You can install a new takedown pin without removing the endplate... it takes AR Force mastery... PM me for details. Glad you like the lower.
Steve, you're a genius.

f9c40009fdf8b59d9cfe05d58c6f8493.jpg
 
  • Like
Reactions: cmshoot and Laufen

NWS

Not a hot midget
Administrator
Lifetime Supporter
Mar 24, 2015
2,468
2,489
113
Georgia
Zip code
30172
but how tight does it mate with the upper? No wiggle, no gap? :boink:
 
  • Like
Reactions: DarthVader

Leshaire

Weekend Warrior
Mar 27, 2015
3,343
1,994
113
Acworth
Zip code
30102
Very nice. Thanks for the write up. Glad you like that trigger and compare it to the BCM Enhanced one, as thats the one ill be running in my AR.
 
  • Like
Reactions: DarthVader

DarthVader

Marksman
Mar 25, 2015
1,175
390
113
Henry County
Zip code
30253
Very nice. Thanks for the write up. Glad you like that trigger and compare it to the BCM Enhanced one, as thats the one ill be running in my AR.
They're both very similar to the ALG. Definitely heavier than I'm used to, but good enough that I'm not going to swap it out.
 

cmshoot

Marksman
Jul 12, 2016
1,403
1,710
113
Dallas, GA
Zip code
30132
NP3 and NP3 Plus are excellent coatings. I own several firearms that are all or partially-coated in NP3. Fixing to send another one to Robar, along with a bunch of magazines.
 
  • Like
Reactions: DarthVader

Leshaire

Weekend Warrior
Mar 27, 2015
3,343
1,994
113
Acworth
Zip code
30102
They're both very similar to the ALG. Definitely heavier than I'm used to, but good enough that I'm not going to swap it out.
The only ALG trigger ive ever tried first hand was their $50 AK trigger which was a pile of hot garbage. Hopefully this is no where in the ballpark lol
 

Wallace

Tracker
Trusted Trader
Mar 26, 2015
828
370
113
Cartersville
Zip code
30145
Did you just use a pic to depress the detent and slide the pin out? It's what I have done to not have to remove an end plate.
 

DarthVader

Marksman
Mar 25, 2015
1,175
390
113
Henry County
Zip code
30253
Did you just use a pic to depress the detent and slide the pin out? It's what I have done to not have to remove an end plate.
More or less, yes. Plus, using the front pivot pin or a straight clevis to act as a slave in and hold the detent as you reinstall the new takedown pin.
 
  • Like
Reactions: Wallace

permaneo vox

Powered by Silencer Shop
Trusted Trader
Sep 21, 2015
426
281
93
Heart of Georgia
Zip code
31020
They're both very similar to the ALG. Definitely heavier than I'm used to, but good enough that I'm not going to swap it out.

Very nice. Thanks for the write up. Glad you like that trigger and compare it to the BCM Enhanced one, as thats the one ill be running in my AR.

That's because it's the same fcg. The Simmonds markings & the coating give it away.
 
  • Like
Reactions: Leshaire

Wallace

Tracker
Trusted Trader
Mar 26, 2015
828
370
113
Cartersville
Zip code
30145
I prefer using the 2 angle pic from the el cheapo Harbor Freight set. The tapered point slides right in and moves the detent back with out fumbling around. You just rotate the pin and pic around together. Then I like the 1/4 clevis from Ace Hardware to use as the slave.

image.jpeg
 
  • Like
Reactions: DarthVader

DarthVader

Marksman
Mar 25, 2015
1,175
390
113
Henry County
Zip code
30253
I prefer using the 2 angle pic from the el cheapo Harbor Freight set. The tapered point slides right in and moves the detent back with out fumbling around. You just rotate the pin and pic around together. Then I like the 1/4 clevis from Ace Hardware to use as the slave.

View attachment 19018
Well, I couldn't exactly run to Harbor Freight in Fayetteville at 1AM!
 
  • Like
Reactions: Wallace