Suppressor Covers

[Red Dawn]

Have you had trouble with the heat coming off the can causing a mirage in your optic. I found a device that looks to be a good fix for that.




https://www.riflesonly.com/pro-shop/suppressor-covers.html

 

[Cudruln]

Says the outer cover is rated for 3 mag dumps on full auto. This would possibly help with switching over to another gun if it is still warm.

 

[Cudruln]

I will need to see if it will fit my little fatty can

 

[Red Dawn]

I will need to see if it will fit my little fatty can

Here's another one.

http://www.armageddongear.com/Suppressor-Cover

 

[DarthVader]

Trust me.

http://www.cole-tac.com/shop/

 

[DarthVader]

Have you had trouble with the heat coming off the can causing a mirage in your optic. I found a device that looks to be a good fix for that.


View attachment 10190

https://www.riflesonly.com/pro-shop/suppressor-covers.html

Are you looking for mirage reduction or something that can handle rapid fire? There are alot of companies making mirage covers, but only a few designed to really handle heat. If you're going to be blasting, get one designed to handle high heat or you'll end up melting the cover to your suppressor. Most of the heat resistant ones will run $90-125.

 

[Red Dawn]

Are you looking for mirage reduction or something that can handle rapid fire? There are alot of companies making mirage covers, but only a few designed to really handle heat. If you're going to be blasting, get one designed to handle high heat or you'll end up melting the cover to your suppressor. Most of the heat resistant ones will run $90-125.

I'm not planning on doing 3 mag dumps but I will sit and shoot consistent shots just pausing for cadence to get on target. I'm not switching to another gun just didn't want any interference with heat.

 

[DoglegArms]

They should make one out of silicone. It won't melt.

 

[Willy Leadwell]

You can buy a roll of exhaust wrap for $10 and make your own.

 

[PewPewPewCo]

They should make one out of silicone. It won't melt.

http://www.silencershop.com/gear/pouches-and-covers/bowers-griptastic-suppressor-cover.html

 

[Cudruln]

Apparently my can is to fat for most of these.

 

[DarthVader]

http://www.silencershop.com/gear/pouches-and-covers/bowers-griptastic-suppressor-cover.html

Have you ever tried to use one of those? Pain in the butt to install or remove.

 

[DoglegArms]

Have you ever tried to use one of those? Pain in the butt to install or remove.

Not with lube it isn't.

 

[DoglegArms]

http://www.silencershop.com/gear/pouches-and-covers/bowers-griptastic-suppressor-cover.html

They should make one from pubic hair of a fat lady.

Find that!

 

[DarthVader]

Not with lube it isn't.

Never tried that. Seems like the lube would burn up and leave a mess under the cover?

 

[DoglegArms]

Never tried that. Seems like the lube would burn up and leave a mess under the cover?

I have no idea. I was being dumb. Just ignore me after midnight. To be safe 11:30pm.

 

[DarthVader]

I have no idea. I was being dumb. Just ignore me after midnight. To be safe 11:30pm.

Ambien again?

Probably a bad idea honestly. But the only one of those silicone covers I've ever fooled around with, had to be cut off of the suppressor to remove it.

 

[NWS]

You can buy a roll of exhaust wrap for $10 and make your own.

That's what I used to use on my bolt gun. My semi autos don't have magnified optics, so I never worried about them.

 

[SouthernSlammed]

Says the outer cover is rated for 3 mag dumps on full auto. This would possibly help with switching over to another gun if it is still warm.

yep, more than 3 mag dump, you should be wrapping it in bacon!!!

 

[SouthernSlammed]

Ambien again?

Probably a bad idea honestly. But the only one of those silicone covers I've ever fooled around with, had to be cut off of the suppressor to remove it.

fooling around with one, you really should of had lube, may not have gotten your "suppressor" stuck!!