Semper Paratus Arms AR15 Armorers Course - McDonough, GA - April 16-17
- Thread starter DarthVader
- Start date
SIONICS Weapon Systems Atlanta PD patrol carbine.
#sionicsweaponsystems #semperparatusarms #b5systems #lawenforcement #m4carbine #guns #ar15 #firearms
#sionicsweaponsystems #semperparatusarms #b5systems #lawenforcement #m4carbine #guns #ar15 #firearms
Alright guys, we've got about 4 weeks left. Don't forget, you can save your spot in the class with a 50% deposit.
REGISTRATION DEADLINE IS 4/1/16
REGISTRATION DEADLINE IS 4/1/16
Semper Paratus Arms will be in Georgia at the Henry County Police Dept. This is an open enrollment course
Course registration and payment will be conducted through- http://www.semperparatusarms.com/course-schedule-registration/
Dates: April 16/17 2016
Time: 0900-1730
Location: Henry County Police Dept.
108 S. Zack Hinton Parkway
McDonough, GA
Cost: 350.00
STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.
Additionally there is a new "minimalist" tool kit for the course.
All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.
The complete kit is only necessary for those building a weapon during the course.
Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
Nylon and Brass Hammer (1 oz.)
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
Minimalist Tool List
Glock Punch
Nylon and Brass gun smithing hammer. (1 oz)
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......
Overview
This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....
Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.
The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.
TD 1
-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)
TD 2
-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance
Instructor Bio
This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
Course registration and payment will be conducted through- http://www.semperparatusarms.com/course-schedule-registration/
Dates: April 16/17 2016
Time: 0900-1730
Location: Henry County Police Dept.
108 S. Zack Hinton Parkway
McDonough, GA
Cost: 350.00
STUDENTS MUST BRING A COMPLETE AR STYLED WEAPON OR PARTS KIT.
Additionally there is a new "minimalist" tool kit for the course.
All tools can be purchased through Brownells and it is the recommended source. http://www.brownells.com. The complete tool list is only required if you are building a weapon. The "minimalist" kit is the minimum required.
The complete kit is only necessary for those building a weapon during the course.
Complete set of steel punches- 1/16, 5/64, 3/32, 1/8, 5/32 (Starrett is preferred)
Complete set of roll pin holders
Complete set of roll pin punches
Nylon and Brass Hammer (1 oz.)
Small to medium pair of needle nose pliers
Large flat tip screwdriver or variable tip screwdriver set
Bolt Catch Pin Punch
Pivot Pin Installation Tool
Note taking material
Minimalist Tool List
Glock Punch
Nylon and Brass gun smithing hammer. (1 oz)
6" flat tip screwdriver or correct allen wrench for grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Instructor will be bringing a variety of specialty tools to the class, to include a vise, vise blocks, etc......
Overview
This class will be taught using various media sources (videos, powerpoints and pictures) as well as well as hands on with functional weapons provided by the students. At the conclusion of the course all students should be able to fully disassemble and assemble a functional weapon from parts. In addition they should be able to recognize common malfunctions and be able to troubleshoot issues that are frequently encountered. We will cover standard AR's, SBR's and AR pistols. We will be installing barrels, staking carrier keys, replacing extractors, etc....
Students will have the opportunity to fix issues during the course such as stakings, etc... and check the weapon using gages.
The course will conclude with all students taking a written test as well as hands on test which will include the complete disassembly and reassembly of the weapon followed by a functions test.
TD 1
-Introduction to the AR15 platform, its history, and cycle of operation
-Parts breakdown and nomenclature
-Tool and equipment selection as well as proper usage
-Basic disassembly and reassembly (upper and lower)
TD 2
-Overview of TD 1
-Inspection criteria
-Troubleshooting and malfunctions
-Maintenance
-Complete and detailed dis-assembly and assembly of weapon
-Written test and certificate issuance
Instructor Bio
This course will be taught by a veteran of both the U.S. Army and U.S Coast Guard with over 27 years of experience working with the AR15 family of weapons. In 2005 he entered into the private sector working in Iraq and Afghanistan as an armorer/ instructor for several large private military companies supporting the Department of Defense and the Department of State. He has attended and completed numerous factory armorer courses from such companies as Beretta, Barrett, Colt, Dillon Aero, FNHUSA, Glock, Knights’ Armament, Remington, and Sig Sauer.
There are still a few spots available for the class. If you're interested, I'd recommend signing up soon or at least securing your spot with the 50% deposit option.
Looking forward to seeing some of you there!
Looking forward to seeing some of you there!
UPDATE FOR ALL INTERESTED LAW ENFORCEMENT PERSONNEL
Update for the upcoming Semper Paratus Arms AR15 armorer courses in Georgia in April. The instructor is working with both host agencies to get all LE personnel POST credit for the course. Information is currently being submitted for POST approval.
http://www.semperparatusarms.com/course-schedule-registration/
Update for the upcoming Semper Paratus Arms AR15 armorer courses in Georgia in April. The instructor is working with both host agencies to get all LE personnel POST credit for the course. Information is currently being submitted for POST approval.
http://www.semperparatusarms.com/course-schedule-registration/
@EugenFJR
@AirOpsMgr
@permaneo vox
@freedom
@DoglegArms
@1776
@FatAlbert
@Wallace
Alright fellas! Two weeks until registration deadline! Hope to see you in April.
ATTENTION ALL LAW ENFORCEMENT PERSONNEL: this class is pending GA POST approval. Attendees will receive POST credit for attending.
Course also includes a three year Manufacturers Certification
@AirOpsMgr
@permaneo vox
@freedom
@DoglegArms
@1776
@FatAlbert
@Wallace
Alright fellas! Two weeks until registration deadline! Hope to see you in April.
ATTENTION ALL LAW ENFORCEMENT PERSONNEL: this class is pending GA POST approval. Attendees will receive POST credit for attending.
Course also includes a three year Manufacturers Certification
Think I'm signing up for this. I need another skill for SHTF and I'm not a very good gardener.
I hope you do man. I have no doubt that you will thoroughly enjoy the class. I think it will be right up your alley.
UPDATE: THIS CLASS HAS BEEN APPROVED BY GA POST FOR 16 HOURS POST CREDIT.
The registration deadline is drawing near, time to get off the fence and get signed up!
The registration deadline is drawing near, time to get off the fence and get signed up!