Rattlecan Shotty

[fyroc]

I have some Magpul FDE Aluma‑Hyde and want to paint my cheap pump shotty. I dont want to take it apart fully. Think I can get away with only taking it apart a bit as long as I plug up the necessary holes?

 

[Mac11FA]

Shure!

 

[FatAlbert]

You'll be more satisfied with the results if you disassemble. On a pump shotgun it almost seems like it would be easier to disassemble than to mask stuff off.

 

[Righter13]

Worst case you just disassemble and then paint over the first try lol.

 

[Jake]

Worst case you just disassemble and then paint over the first try lol.

^^^the king of rattle can paint jobs has spoken.

 

[dial1911]

Worst case you just disassemble and then paint over the first try lol.

This is the way I do it.

 

[AtlMedic]

Just dip the whole gun in a bucket of paint. That way the paint can get into all the little spots spray wont get to.

 

[Righter13]

^^^the king of rattle can paint jobs has spoken.

I appreciate the compliment.

The first spray on a 2k$ Rifle is the hardest part.

 

[Jake]

I appreciate the compliment.

The first spray on a 2k$ Rifle is the hardest part.

I was gonna say that you had several thousand dollars in your suppressed SBR's and they are all sporting rattle can paint jobs. I dig em though.

 

[fyroc]

I’ll disassemble everything but the stock. I don’t have an Allen wrench long enough for that.

 

[Righter13]

I was gonna say that you had several thousand dollars in your suppressed SBR's and they are all sporting rattle can paint jobs. I dig em though.

I appreciate it. Those are works of love.

 

[Huddy]

I’ll disessemle everything but the stock. I don’t have an Allen wrench long enough for that.

Sounds like a good excuse to go tool shopping...just sayin