POI Shift Suppressed

Southeast Traders Apparel Swag Store

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
you pack your shit up and leave with that talk of un floating the barrel. We don't welcome your kind here
No, you don't "un-float" it, you just basically extend the contact the barrel has with the receiver. It's locked into the receiver anyway, you're simply beefing that connection up. As long as the harmonics are repeatable (which they are with bedding) your accuracy will not be negatively affected. 100% of the time that I've bedded this part of the barrel I've seen accuracy improvements.
 

PewPewPewCo

Sniper
Mar 23, 2015
2,139
1,075
113
Georgia
No, you don't "un-float" it, you just basically extend the contact the barrel has with the receiver. It's locked into the receiver anyway, you're simply beefing that connection up. As long as the harmonics are repeatable (which they are with bedding) your accuracy will not be negatively affected. 100% of the time that I've bedded this part of the barrel I've seen accuracy improvements.
I hate what I don't understand.

Still gives me the heeby jeebies
 

Laufen

Beloved flaming retard
Lifetime Supporter
Mar 23, 2015
7,927
6,129
113
I85
Zip code
30030
you pack your shit up and leave with that talk of un floating the barrel. We don't welcome your kind here
Here's a pic of what I'm talking about. Just bedding a small section in front of the recoil lug. This is common practice to prevent sagging, and a lot of precision rifle companies do something similar.

st_action-bedding-secrets_d.jpg

I think this would really help @SouthernSlammed
 

SouthernSlammed

Gingerbeard Operator
Lifetime Supporter
Aug 29, 2015
3,107
2,616
113
Fapville
Zip code
31061
Here's a pic of what I'm talking about. Just bedding a small section in front of the recoil lug. This is common practice to prevent sagging, and a lot of precision rifle companies do something similar.

View attachment 25749

I think this would really help @SouthernSlammed

will certainly look into it! Especially since I would like to make this gun accurate at long distances.
 
  • Like
Reactions: Laufen

Leshaire

Weekend Warrior
Mar 27, 2015
3,343
1,994
113
Acworth
Zip code
30102
This thread had me a little freaked out until I remembered I dont have long ass barrels on anything I own lol...
 

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
What about H-S Precision or McMillan stock replacement. Pricey but may be another option as well.
 

Mac11FA

Disgruntled large member
Super Moderator
Lifetime Supporter
Patriot Lifetime
Mar 26, 2015
3,840
3,011
113
Locust Grove, GA
Zip code
30248
Try bedding the barrel. Ruger won't give a shit because they will say they didn't design the gun to shoot suppressed. If this will be a dedicated setup for suppressed shooting, adjust the scope to get back on 0" at 100 yds. If it is dead low, consider switching to a BDC reticle and figure out which line to use for suppressed shooting. JMHO
 
  • Like
Reactions: SouthernSlammed

erkinator 2

Smiling Handyman
Lifetime Supporter
Jul 1, 2015
1,215
1,931
113
Zip code
30513
Had an issue with my 22 barrels and ARC22. I called Brian and he rechecked the barrels and upgraded the supressor. Now wither on or off its dead on for 22. Can`t speak for the 30. 1st runs had some tweeks needed during manufacture but he takes care of it. I have seen hunting shows PIGMAN where he proved POI shift during a hunt with supressor
 

Allsmiles

Frontiersman
Site Supporter
Kalash Klub
Mar 15, 2017
335
517
93
Golfcart City, GA
Zip code
30269
My ARC30 can shoots about 1.5" low at 40 yards compared to my Harvester 762. Removing all cans and shooting same ammo from same box and all 3 of my guns shot just over an inch high at 40 yards over the Harvester 762. 2 Ruger American Predator 308 and DPMS LR308 were the hosts for this time. You are looking at 27oz, 13oz and 0 added to the end of the barrel making the POI changes.
 
  • Like
Reactions: SouthernSlammed