I like to waste money some times... The TBRCi Glock Micro Comp

[Leshaire]

And I really want this TBRCi Glock Micro Comp!

https://tbrci.com/product/glock-micro-comp/

 

[dial1911]

Well, it's more useful than a thread protector. Kinda expensive though.

For what it's worth, I traded into a G30 once upon a time that came with a Stormlake compensated barrel. The barrel extended about 3/4" beyond the slide and had two flat cut outs in it... didn't do crap to noticeably reduce recoil in my opinion.

I got a used factory barrel to replace it.

 

[Leshaire]

Well, it's more useful than a thread protector. Kinda expensive though.

For what it's worth, I traded into a G30 once upon a time that came with a Stormlake compensated barrel. The barrel extended about 3/4" beyond the slide and had two flat cut outs in it... didn't do crap to noticeably reduce recoil in my opinion.

I got a used factory barrel to replace it.

But did it look nearly that cool ^^^ lol?!?!

 

[Leshaire]

def doesnt do much for flash lol.

 

[dial1911]

But did it look nearly that cool ^^^ lol?!?!

Well, no. It didn't match the squareness of the Glock slide nearly that well

 

[Leshaire]

Well, no. It didn't match the squareness of the Glock slide nearly that well

Im here for stuff that looks dope haha. Hence the wasting money comment.

 

[Righter13]

Im here for stuff that looks dope haha. Hence the wasting money comment.

Then do a Glock 80% lower. Mine will be here Friday.

 

[Leshaire]

Then do a Glock 80% lower. Mine will be here Friday.

Link?!

 

[Righter13]

Link?!

https://www.magcommander.com/collec...compact-pistol-frame-kit-glock-19-23-32-black

There's two versions. Textured and not textured.

I have a Gen 3 sitting around that I don't use really so I'm gonna strip it and use those parts for the 80% build. I also have a threaded barrel around that I don't use. And ordered a stripped slide from LW.

This "Glock" will have no serial numbers.

 

[Laufen]

Crazy ass millennials. Is it held on with a set screw? Yeah, that'll be cool. lol

 

[AtlMedic]

I'm totally going to get one if those. I shot one and did notice a difference. But mostly to spite you.

 

[Leshaire]

Crazy ass millennials. Is it held on with a set screw? Yeah, that'll be cool. lol

Two** screws... Science!

 

[Leshaire]

https://www.magcommander.com/collec...compact-pistol-frame-kit-glock-19-23-32-black

There's two versions. Textured and not textured.

I have a Gen 3 sitting around that I don't use really so I'm gonna strip it and use those parts for the 80% build. I also have a threaded barrel around that I don't use. And ordered a stripped slide from LW.

This "Glock" will have no serial numbers.

Damn gen 3 only. I only have gen 4 stuff laying around. Also what all do you have to do to it?

 

[Leshaire]

I'm totally going to get one if those. I shot one and did notice a difference. But mostly to spite you.

Im like 5 seconds away from snagging it and the Sico barrel for my 17 lol...

 

[Righter13]

Damn gen 3 only. I only have gen 4 stuff laying around. Also what all do you have to do to it?

Drill like 3 holes and mill out some of the slide material that they have to leave on. Shouldn't take more than about an hour or so.

 

[Leshaire]

Drill like 3 holes and mill out some of the slide material that they have to leave on. Shouldn't take more than about an hour or so.

How do you plan to mill that out?

 

[Righter13]

How do you plan to mill that out?

I have access to a mill. However it's all polymer and can be done w a dremel

 

[Leshaire]

I have access to a mill. However it's all polymer and can be done w a dremel

Isnt it illegal to use other's tools to create a gun?

 

[Leshaire]

Aaaaaaaaaand I freaking bought it and a G17 barrel rofl

 

[dial1911]

Crazy ass millennials. Is it held on with a set screw? Yeah, that'll be cool. lol

Threaded barrel cover- I was confused looking at the set screw/roll pin thing on the side too.