Foreign Weapons and Obscure Builds V3
- Thread starter KhyberPass
- Start date
Need bigger light to match drum
Pretty sure that's the biggest they make.
Funny thing is that big bastard is perfect as a HFG....
Just tried this - it’s saying $47 for shipping 33 boxes (30rnd per box)Mo' bettah.
No sales tax. 30 bucks for shipping.
- Jul 5, 2015
- 6,135
- 30,134
- 113
- Zip code
- 30022
Try 900 rounds and see if that reduces it. There are 900 per case.
Last edited:
Current Bid
$10,305.00
Starting Bid
$1.00
Enter your maximum bid.
$
Minimum bid: $10,330.00
No Reserve!
71 Bids Bid History
Time Left 15 min rule
9h 57m +
Ending Time
6/26/2022 8:45 PM
$10,305.00
Starting Bid
$1.00
Enter your maximum bid.
$
Minimum bid: $10,330.00
No Reserve!
71 Bids Bid History
Time Left 15 min rule
9h 57m +
Ending Time
6/26/2022 8:45 PM
Stabby Things | The Lifeboat
All things sharp & stabby... except commie sharp & stabby crap
southeastoutdoors.boards.net
Last edited:
Needs to take Glock mags
Buy my 10.5" AR pistol - comes with two uppers, one in 5.56x45 and the other in 7.62x39 with a mag.
800
Pics to cum
800
Pics to cum
Wash your car, that should do it.
Lots of spots just grazing away 50' - 60' from my front door
Sharp and Pokey Things | The Debris Field
A place for all things knives and such
southeastoutdoors.boards.net
Last edited:
These?
Prob chop just below one of the horizontal ribs and cut a groove on or just above the rib for the baseplate to latch onto solid.
May have to put a very slight bow in the baseplate to make snug or use a BFH
May end up being 19rd, 20rd, 21rd, who knows, really depends on where those horizontal ribs land.
30rd usually gets cut ⅛-¼" below the loaded indicator window just to give you an idea.
Actually have to chop longer on metal to allow for extra material to be formed into tabs for the baseplate
Send it and I will molest it in ways bubba could only dream about
Prob chop just below one of the horizontal ribs and cut a groove on or just above the rib for the baseplate to latch onto solid.
May have to put a very slight bow in the baseplate to make snug or use a BFH
May end up being 19rd, 20rd, 21rd, who knows, really depends on where those horizontal ribs land.
30rd usually gets cut ⅛-¼" below the loaded indicator window just to give you an idea.
Actually have to chop longer on metal to allow for extra material to be formed into tabs for the baseplate
Send it and I will molest it in ways bubba could only dream about
You didn't even have to tag me lol
The weep hole on the back is your cut mark for 20rds...