Foreign Weapons and Obscure Builds V3

[AC-130 Above]

Wait why is there a drop in specific for colt carbines @Fast306stang

Two Piece Carbine Length Handguards

<p>These handguards are designed to replace your standard plastic handguards with our 4 rail picatinny design. Simply remove your existing handguard panels and insert these in their place. <u>No gunsmithing required!</p></u>

yhm.net

 

[Fast306stang]

Wait why is there a drop in specific for colt carbines @Fast306stang

Two Piece Carbine Length Handguards

<p>These handguards are designed to replace your standard plastic handguards with our 4 rail picatinny design. Simply remove your existing handguard panels and insert these in their place. <u>No gunsmithing required!</p></u>

yhm.net

That's interesting, I have no idea. I googled and can't find out anything. At first I thought it was bc the bottom is easily removable for the M203, but it looks like the bottom removes easily on the standard one also.

 

[2Glocks]

1.5 mile run in 20lb vest
1.5 miles without vest
Roached

 

[Okuma]

I need an engineer.... making this trailer to move pitching mounds. Red is where winch will mount, blue is cross bar to winch over and black/2x4’s would be tube or angle for mound to slide up. Will brace as needed. Hitch is about at height if on machine.

 

[2Glocks]

I need an engineer.... making this trailer to move pitching mounds. Red is where winch will mount, blue is cross bar to winch over and black/2x4’s would be tube or angle for mound to slide up. Will brace as needed. Hitch is about at height if on machine. View attachment 140159

just use a lotta duct tape you’ll be fine

 

[Okuma]

just use a lotta duct tape you’ll be fine

That won’t work with this bunch... Already had one guy injured while picking up and putting on gator bed.

 

[Balthaz]

Looking for a personal injury attorney. Any recommendations?
Thank you.

If you find a good one let me know.
The one I used for my Motorcycle accident is awesome but he only does Motorcycle's or Car's

 

[Axeman]

Views from my jobsite today…

 

[Balthaz]

 

[Fast306stang]

View attachment 140160 View attachment 140161 View attachment 140162 View attachment 140163 View attachment 140164 View attachment 140165 View attachment 140166
Views from my jobsite today…

Who installs cabinets on the OUTSIDE of a skyscraper?

 

[Miles]

If you find a good one let me know.
The one I used for my Motorcycle accident is awesome but he only does Motorcycle's or Car's

Mine was car accident.

 

[Axeman]

View attachment 140168

Nice Rugar

 

[Axeman]

Who installs cabinets on the OUTSIDE of a skyscraper?

Spider-man. He’s helping out Superman.

 

[dial1911]

Who installs cabinets on the OUTSIDE of a skyscraper?

That sums up my experience and opinion of most architects.

 

[dial1911]

Nice Rugar

The original, copied by Bill in his garage.

Edit.... damn that's a luger not a nambu.

 

[dial1911]

I need an engineer.... making this trailer to move pitching mounds. Red is where winch will mount, blue is cross bar to winch over and black/2x4’s would be tube or angle for mound to slide up. Will brace as needed. Hitch is about at height if on machine. View attachment 140159

Looks like you've got it figured out... what do you need?

 

[Hayata]

Learn something new every day.

I thought pitching mounds were made of dirt...

 

[Cudruln]

I need an engineer.... making this trailer to move pitching mounds. Red is where winch will mount, blue is cross bar to winch over and black/2x4’s would be tube or angle for mound to slide up. Will brace as needed. Hitch is about at height if on machine. View attachment 140159

Gracious tax dollars at work. Thanks for doing your part.

 

[Red Squirrel 556]

FF or drop in? Standard barrel nut or proprietary?

An actual picatinny quad rail?

I bought the Centurion again. Extended FSP cutout rail, you have to cut off or remove the handguard cap and delta ring and it bolts on the factory barrel nut. They also make one that's not extended if you'd rather have that.

View attachment 140153

Love that rail....

 

[Red Squirrel 556]

If someone wants that 410 Saiga I have listed, I'll do $800 south of Exit 205

This is a hesitant feeler so act quick before i change my mind lol

@Red Squirrel 556 has first rights...

Something in 5.56 next for me.