Foreign Weapons and Obscure Builds V3

Preparedness Depot in Acworth, GA

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
It’s moving into the keep column for sure.
Time will tell.

The 6mm arc in an ar platform has tuning issues as well. (If you believe the internet) I’m not sure I want another problem child.

I’ve n ver had a build that wasn’t 100% from round 1 to round 10,000 plus.

Frustrating.

I understand the frustration .. the straight wall jacket ARs are for hunting so you really are only firing a couple rounds at a time. It’s those of us that like to shoot and want what we build to perform to our expectations or what’s the point. If you stick with the little things like keep the mags loaded at all times the springs in the mags could be too tight you’ll eventually get there.
 

Red Dawn

Wolverines
Site Supporter
Lifetime Supporter
Aug 12, 2015
5,743
6,957
113
H Town
Zip code
30228
It did help.
Polishing that area helped too.

I’ll polish and remove more material on the other mag. Also, there info that shows that removing an 1/8th of an inch on the forward part of the feed lips help also.

Trying a little at a time.
So far I’m pleased.

Exactly what’s the round hitting going into battery ... and the springs in the mags could be extra tight so leave them loaded till next Range day
 

lesptr

Ninja
Kalash Klub
Lifetime Supporter
Mar 7, 2018
9,150
46,119
113
Newnan, GA
Zip code
30263
I understand the frustration .. the straight wall jacket ARs are for hunting so you really are only firing a couple rounds at a time. It’s those of us that like to shoot and want what we build to perform to our expectations or what’s the point. If you stick with the little things like keep the mags loaded at all times the springs in the mags could be too tight you’ll eventually get there.

With the polished mag, I went 50 rounds till the one and only feed issue.
Properly cleaned, it’ll be fine for hunting.
Plinking is a different story though
 

lesptr

Ninja
Kalash Klub
Lifetime Supporter
Mar 7, 2018
9,150
46,119
113
Newnan, GA
Zip code
30263
Exactly what’s the round hitting going into battery ... and the springs in the mags could be extra tight so leave them loaded till next Range day

The rounds hit

Never mind.
I’ll take a picture and put an arrow where the bullet hits the mag during recoil, since there’s not a word that referee to that particular area.
 

Fast306stang

Black Bear under anesthesia
Site Supporter
Kalash Klub
Jul 1, 2015
18,091
98,514
113
Zip code
31028
Talk dirty to me daddy dammit man
Man, it's soft rolls all baked together like cinnamon rolls, with slices of cheese melted over the top. You can't tear one in half without mushing the whole thing. Take one and eat it and quit with the "I only want half of one" bullshit. Fucking retarded. No one wants to eat the other half you've finger fucked and squished and left on the plate for someone else.
 

T_Max

Master of the Meat
Super Moderator
Kalash Klub
Lifetime Supporter
Apr 30, 2015
8,317
41,920
113
NW GA
Man, it's soft rolls all baked together like cinnamon rolls, with slices of cheese melted over the top. You can't tear one in half without mushing the whole thing. Take one and eat it and quit with the "I only want half of one" bullshit. Fucking retarded. No one wants to eat the other half you've finger fucked and squished and left on the plate for someone else.
I get it , your father-in-law again ?