Foreign Weapons and Obscure Builds V3

[Miles]

Brown Bear 196 from Kvar - I guess that's Barnaul?


I'm looking forward to getting it to the range and seeing what it does on paper.

Yep, BB is Barnaul. Much better subsonic ammo than Tula.

 

[Fast306stang]

It’s not that someone removed the guts of the door ball detent - they just fail pretty often. And when that happens the ball gets launched, the spring gets stuck halfway out, and most people mar the door trim trying to jam the door shut with the spring in the way.

I just had to fix the same situation on the rental I’m in. Bought a pair of ball catches on Amazon for $4

When I put the new ball in, it was captured. No way it was coming out the top. Also the threaded plug at the bottom that holds the guts in was gone bc someone removed it.

 

[Foothills_edc]

$65 ALG AK trigger. Git it boys

https://shop.akoperatorsunionlocal4774.com/ALG-Defense-AK-Trigger-AKT-EL-ALG-Defense-AK-Trigger-AKT-EL.htm

I cannot recommend this trigger. The pull is very light, and while firing the roll pin that engages with the safety popped out of my trigger causing the gun to fire when the safety was engaged. ALG makes some good budget stuff but the Ak trigger missed the mark for me.

 

[KhyberPass]

Don’t be scared of the heat, embrace it. Roonin over lunch idgaf

Bro yesterday was 92 and it was hard AF to get 3 miles out. Maybe I try again today fuck it

 

[KhyberPass]

My oldest daughter and I call everyone smooth brains lmaoooo

Boi ain’t got no wrinkles

 

[Tedkennedy]

Mobbed 3! Took the hilly route. Trying to flatten out my pace. Normally I start of fast and end slow. Tried to flatten but ended up reversing lmao.

mile 1: 7:30
Mile 2: 7:15
Mile 3: 6:35

averaged pace 7:07/mile. Feeing good!

View attachment 131060

Good job! I ran 2.2 a while ago - first run since I came down with this "cold". I refuse to let this get me down.

 

[KhyberPass]

I cannot recommend this trigger. The pull is very light, and while firing the roll pin that engages with the safety popped out of my trigger causing the gun to fire when the safety was engaged. ALG makes some good budget stuff but the Ak trigger missed the mark for me.

I stand with this assessment and glad you popped in to speak your experience. I didn’t wanna tell the story for you. That’s a Yuge risk and I always questioned the fit file fit approach with the roll pin

 

[Fast306stang]

Half the doors were missing the middle hingepin, tons of hinge screws were loose, a bunch of the screws on the locksets were loose which made the doorknobs floppy...a few of the doors were removed completely and I had to rehang them, God knows why. All the door stops were broken so I replaced all 30 something of them-- Stupid crap everywhere, this is just par for the course.

 

[Miles]

8 to 10 inches low at 100 yards

Zero 5" high at 50 yards.

 

[Fast306stang]

I stand with this assessment and glad you popped in to speak your experience. I didn’t wanna tell the story for you. That’s a Yuge risk and I always questioned the fit file fit approach with the roll pin

I don't like the Tapco G2s either even though that MAADI I just got has one in it. I'll get around to replacing it later, I've been really liking the RAK1.

 

[KhyberPass]

Good job! I ran 2.2 a while ago - first run since I came down with this "cold". I refuse to let this get me down.

It was hard coming off of Covid and running it took a long time for my heart to kind of steady out and my breathing too. Mostly my heart beat

 

[KhyberPass]

I don't like the Tapco G2s either even though that MAADI I just got has one in it. I'll get around to replacing it later, I've been really liking the RAK1.

I like the RAK1 too so far and I’ve been using the FIME enhanced in the krink. @3x has the FIME in his too but I dunno how much he’s shot it

ive got several hundred through the krink right now. 300 ish or so

 

[Fast306stang]

I don't like the Tapco G2s either even though that MAADI I just got has one in it. I'll get around to replacing it later, I've been really liking the RAK1.

I'm a strong believer that 922(r) is one of the worst things to ever come out of legislation and is probably the biggest reason we generally don't see surplus FCG's in the rifles we buy. I still remember and thank @KhyberPass for hooking me up with the surplus springs and little fcg parts I was missing when I needed them for my Romy build and was still in my AK infancy...

 

[KhyberPass]

Btw my krink over gassed like a bitch lol. Tosses casings to the moon
Probably will get KNS piston and adjust it even for unsupresssd fire.
Trunnion shows very slight contact with carrier but no penning or anything mostly paint scratching more in tune with disassembly than actual cycling. Carrier looks good. Maybe I am gassed appropriately

 

[Fast306stang]

I like the RAK1 too so far and I’ve been using the FIME enhanced in the krink. @3x has the FIME in his too but I dunno how much he’s shot it

ive got several hundred through the krink right now. 300 ish or so

I'll look into the FIME Enhanced...isn't it about 2x the price of the RAK1? How's the pull? The ALG's I've ran across have been outstanding (in the house, haven't actually live fired any) but the pull is just a bit too light for my taste. Edit: I reread and see @foothills has addressed the light trigger pull in his post also

 

[Fast306stang]

Btw my krink over gassed like a bitch lol. Tosses casings to the moon
Probably will get KNS piston and adjust it even for unsupresssd fire.
Trunnion shows very slight contact with carrier but no penning or anything mostly paint scratching more in tune with disassembly than actual cycling. Carrier looks good. Maybe I am gassed appropriately

Didn't your SBR manufacturer have to address gas port issues? I thought I remembered you mentioning something about it...

 

[2Glocks]

Bro yesterday was 92 and it was hard AF to get 3 miles out. Maybe I try again today fuck it

Do it!

For legal reasons if you die this is not serious and a joking post.

 

[KhyberPass]

Didn't your SBR manufacturer have to address gas port issues? I thought I remembered you mentioning something about it...

Oh it’s 100% factory OEM gas port, it just had a small doughnut “restrictor” that was pressed into the port for the 16” barrel, all they did was remove that doughnut and allow it to be original size again.

more like ALL Krinkov are over gassed nothing out of the ordinary. Let’s just say all AK are over gassed and the krink even more so

 

[Fast306stang]

Oh it’s 100% factory OEM gas port, it just had a small doughnut “restrictor” that was pressed into the port for the 16” barrel, all they did was remove that doughnut and allow it to be original size again.

more like ALL Krinkov are over gassed nothing out of the ordinary. Let’s just say all AK are over gassed and the krink even more so

Ahhh, ok, tracking! I had it backwards, I thought they INSTALLED a restrictor...

 

[3clicks_Off]

Btw my krink over gassed like a bitch lol. Tosses casings to the moon
Probably will get KNS piston and adjust it even for unsupresssd fire.
Trunnion shows very slight contact with carrier but no penning or anything mostly paint scratching more in tune with disassembly than actual cycling. Carrier looks good. Maybe I am gassed appropriately

KNS is the way but I run a +15% mCarbo recoil spring in the krink also just in case.

Mine is set at 14 clicks in with my can, 9 clicks in without a can.
Mine drops the casing in a bucket a few feet away now vs 30+ feet and everywhere
Reduced recoil, less blow back gas and quieter action too