AAC T9s and 300 BLK

[Red Dawn]

Ok my AAC Tirant 9s is close to being approved I hope at 5 months on the 29th give or take. So here's my setback I'm gonna use this on my pistol however I'd like to mount this on a 300 BLK AR and shoot subsonics but there's no adapter. I talked to AAC they said try QRF and they said get the 300 BLK barrel threaded 1/2x28. Any thoughts?

 

[Righter13]

Buy a .30 can from @DoglegArms

But for reals, you'll either have to get your barrel rethreaed or find someone to make you an adapter.

 

[Red Dawn]

@Righter13 im taking the easier route on this. Having it threaded I guess would be easier than finding an adapter I think. Who would even make an adapter for that.

If I could get another can I would. Believe me.

 

[Righter13]

@Righter13 im taking the easier route on this. Having it threaded I guess would be easier than finding an adapter I think. Who would even make an adapter for that.

If I could get another can I would. Believe me.

Do you have a fixed mount adapter for the can?

 

[Red Dawn]

Do you have a fixed mount adapter for the can?

There's no adapter made by AAC to go from the 5/8 30 cal threads to the 1/2x28 on the can.

 

[Red Dawn]

This is on the can now

 

[Righter13]

But do the make a fixed "booster"

 

[Red Dawn]

But do the make a fixed "booster"

It has the A.S.A.P. (Assured Semi Auto Performance) booster on it. Not sure about another type booster.

 

[Righter13]

It has the A.S.A.P. (Assured Semi Auto Performance) booster on it. Not sure about another type booster.

First things first. You'll need a fixed barrel adapter. Then you can Amazon a 5/8 to 1/2 adapter

http://www.midwayusa.com/product/12...rant-9-eco-9-evo-9-suppressors-aluminum-black

http://www.amazon.com/24-thread-adapter-308-223/dp/B00V566TXU

 

[Red Dawn]

I like it thanks @Righter13 also We need to have another shop M&G when you come back down this way what you think. We can go over how it works and put 1 together and try it out in the shop.

 

[boss_hawg]

Does a 1/2x28 thread on a 300 barrel leave too little metal around the crown to function reliably long-term? If not, that may be your best bet.

 

[Red Dawn]

Does a 1/2x28 thread on a 300 barrel leave too little metal around the crown to function reliably long-term? If not, that may be your best bet.

Not from what I've read. With the subsonic level of course not supersonic and in this case that's the whole reason for shooting this rifle.

 

[boss_hawg]

shooting supers through a tirant 9 is probably not a good idea no matter how you're attached it to your barrel.

 

[Red Dawn]

shooting supers through a tirant 9 is probably not a good idea no matter how you're attached it to your barrel.

I only plan to use subs for this application. I wouldn't shoot it a lot it would only be to shoot suppressed and AAC says you can shoot subs but never supers. The first baffle is steel and the rest are aluminum.

 

[DarthVader]

@Ocean_Glocker uses a T9 on his 300blk. He got a thread adapter, I believe from TROS? An AAC fixed barrel spacer. And shoots subs, a lot. Works like a charm.

 

[DarthVader]

View attachment 13247

View attachment 13248
This is on the can now

Is this your picture? The rear cap should not come apart like that. The blast shield should not be separated from the rear cap.

 

[Red Dawn]

Is this your picture? The rear cap should not come apart like that. The blast shield should not be separated from the rear cap.

Yes this pick is mine. Well it was sent to me by the stamp holder. Should I red thread lock or rock set it.

 

[DarthVader]

Yes this pick is mine. Well it was sent to me by the stamp holder. Should I red thread lock or rock set it.

You bought it used?

Simple fix. First, clean the threads thoroughly. I mean spotless. Then degrease with acetone. Once it has dried completely, apply red loctite to the threads and crank it on as hard as you can by hand. Let the loctite set up for 24 hours. Good to go.

 

[Red Dawn]

Yeah I traded a Glock for it. The suppressor was hardly even used so it needed a good home to get proper use of it.

 

[boss_hawg]

You bought it used?

Simple fix. First, clean the threads thoroughly. I mean spotless. Then degrease with acetone. Once it has dried completely, apply red loctite to the threads and crank it on as hard as you can by hand. Let the loctite set up for 24 hours. Good to go.

I might even use two strap wrenches to get it super tight