.50 Beowulf Questions

Southeast Traders Apparel Swag Store
Leadhoof

Leadhoof

Dumb Bottom
Kalash Klub
Lifetime Supporter
Oct 20, 2017
1,367
7,481
113
30
Florida
e621.net
Zip code
33981
Since I don't deal with anything larger than 7.62x39 very often, maybe some of you could help me out.

1. How thin can I turn the barrel before the gun explodes?

2. Can anybody recommend a good muzzle brake?

I'll probably have more questions as I continue building this stupid thing, so any real answers and sarcastic comments are appreciated.
 
A

Allsmiles

Frontiersman
Site Supporter
Kalash Klub
Mar 15, 2017
335
517
93
Golfcart City, GA
Zip code
30269
The one I shot years ago didn't have a brake. Recoil is not much more than an AK with slant brake. .5 bore doesn't leave a lot of extra barrel to thin.
 
Leadhoof

Leadhoof

Dumb Bottom
Kalash Klub
Lifetime Supporter
Oct 20, 2017
1,367
7,481
113
30
Florida
e621.net
Zip code
33981
Allsmiles said:
The one I shot years ago didn't have a brake. Recoil is not much more than an AK with slant brake. .5 bore doesn't leave a lot of extra barrel to thin.
Click to expand...

I know there's not a lot of barrel to cut away, but I need to find a way to get an HBAR front sight on there.
 
Leadhoof

Leadhoof

Dumb Bottom
Kalash Klub
Lifetime Supporter
Oct 20, 2017
1,367
7,481
113
30
Florida
e621.net
Zip code
33981
A

Allsmiles

Frontiersman
Site Supporter
Kalash Klub
Mar 15, 2017
335
517
93
Golfcart City, GA
Zip code
30269
You might want to verify that the handguard will even close up. I have a couple of heavy barrel guns and had to use a Magpul handguard as my GI stuff wouldn't come close to working. I would think it would be easier to remove material from the end cap than the barrel. If it doesn't work, only cost a couple of dollars to replace.
 
Mac11FA

Mac11FA

Disgruntled large member
Super Moderator
Lifetime Supporter
Patriot Lifetime
Mar 26, 2015
3,840
3,011
113
Locust Grove, GA
Zip code
30248
I was also going to suggest modifying the hand guard/delta ring and/or other components to fit the barrel. Alexander Arma offers a traditional AR platform in .50 Beowulf. They do not sell individual parts, just uppers lowers and complete rifle. If this is the look you are going for then the parts are out there. The image below is their overmatch plus.

icon-img-.50_Beowulf_Overmatch_Plus_rifle.jpg
 
  • Like
Reactions: Leadhoof
Leadhoof

Leadhoof

Dumb Bottom
Kalash Klub
Lifetime Supporter
Oct 20, 2017
1,367
7,481
113
30
Florida
e621.net
Zip code
33981
Mac11FA said:
I was also going to suggest modifying the hand guard/delta ring and/or other components to fit the barrel. Alexander Arma offers a traditional AR platform in .50 Beowulf. They do not sell individual parts, just uppers lowers and complete rifle. If this is the look you are going for then the parts are out there. The image below is their overmatch plus.

View attachment 43977
Click to expand...

Delta ring and handguard work fine, but I will have to bore out the forend cap and front sight. I just hope there's enough material left once I open it to .850
 
  • Like
Reactions: Mac11FA
Leadhoof

Leadhoof

Dumb Bottom
Kalash Klub
Lifetime Supporter
Oct 20, 2017
1,367
7,481
113
30
Florida
e621.net
Zip code
33981
20181027_154959.jpg

Upper's pretty much done. At least all the hard stuff is. Now I just need to paint the barrel, track down the rest of the parts, and get the lower engraved.
 
  • Like
Reactions: Mac11FA and Jake
You must log in or register to reply here.
Top Bottom