Just Submitted a SBR .300 BO with a 10.5 Barrel now to build It

Howard Law
Balthaz

Balthaz

Gone In 60 Seconds
Site Supporter
Kalash Klub
Lifetime Supporter
Mar 26, 2015
5,597
28,961
113
Dallas Ga.
Zip code
30132
Just submitted a SBR this morning, and now just trying to figure out how to build it up.
Submitted this as a SBR .300 Black-Out with a 10.5 Barrel (have one on the way)
Now to build it up for a 30 cal Suppressor.
Starting with a Spikes Honey Badger lower.
Going to build this slowly over time (if I don't get impatient lol).
This is my First E-File Form 1 and my first SBR.
Questions I have are:
1. What Rail works with most Suppressors
2. What Suppressor to get (Probably a Dobbs Defense)
3. What Trigger group
4. What Stock

And I do know I can not assemble it till stamp is approved.
 
madHatter

madHatter

Marksman
Mar 25, 2015
1,484
661
113
Fuckville
Stock:
Any by Daniel defense or mission first tactical if you want a minimalist look.

But since you are going to suppress it, maybe a magpul ubrt, or just a crt.
 
  • Like
Reactions: Balthaz
NWS

NWS

Not a hot midget
Administrator
Lifetime Supporter
Mar 24, 2015
2,468
2,489
113
Georgia
Zip code
30172
Balthaz said:
Just submitted a SBR this morning, and now just trying to figure out how to build it up.
Submitted this as a SBR .300 Black-Out with a 10.5 Barrel (have one on the way)
Now to build it up for a 30 cal Suppressor.
Starting with a Spikes Honey Badger lower.
Going to build this slowly over time (if I don't get impatient lol).
This is my First E-File Form 1 and my first SBR.
Questions I have are:
1. What Rail works with most Suppressors
2. What Suppressor to get (Probably a Dobbs Defense)
3. What Trigger group
4. What Stock

And I do know I can not assemble it till stamp is approved.
Click to expand...


1. Seekins
2. Dobbs
3. BCM gunfighter
4. LWRC


You can build it now, just wrap the buffer tube in papracord, tape, whatever and keep the stock body in the back of the safe until you get your stamp.
 
  • Like
Reactions: Balthaz
Balthaz

Balthaz

Gone In 60 Seconds
Site Supporter
Kalash Klub
Lifetime Supporter
Mar 26, 2015
5,597
28,961
113
Dallas Ga.
Zip code
30132
Can I get a .45 cal Suppressor and use it on the 300 or would it be wiser to use a 7.62 Suppressor so I can use it for both 308 and 300 BO?
Not sure on Suppressors about what works with what, As I also want one for .45 Cal and to use on my 1911 as well.
 
boss_hawg

boss_hawg

Marksman
Jul 13, 2015
1,230
1,045
113
Zip code
30328
Balthaz said:
Just submitted a SBR this morning, and now just trying to figure out how to build it up.
Submitted this as a SBR .300 Black-Out with a 10.5 Barrel (have one on the way)
Now to build it up for a 30 cal Suppressor.
Starting with a Spikes Honey Badger lower.
Going to build this slowly over time (if I don't get impatient lol).
This is my First E-File Form 1 and my first SBR.
Questions I have are:
1. What Rail works with most Suppressors
2. What Suppressor to get (Probably a Dobbs Defense)
3. What Trigger group
4. What Stock

And I do know I can not assemble it till stamp is approved.
Click to expand...
1. seekins (nws said), odin works, yhm diamond or light weight quad (they're not light weight)
2. dobbs, specwar, or saker
3. how much do you wanna spend?
4. mft minimalist or whatever floats your boat
Balthaz said:
Just submitted a SBR this morning, and now just trying to figure out how to build it up.
Submitted this as a SBR .300 Black-Out with a 10.5 Barrel (have one on the way)
Now to build it up for a 30 cal Suppressor.
Starting with a Spikes Honey Badger lower.
Going to build this slowly over time (if I don't get impatient lol).
This is my First E-File Form 1 and my first SBR.
Questions I have are:
1. What Rail works with most Suppressors
2. What Suppressor to get (Probably a Dobbs Defense)
3. What Trigger group
4. What Stock

And I do know I can not assemble it till stamp is approved.
Click to expand...
 
Green Panther

Green Panther

Frontiersman
Mar 25, 2015
291
139
113
Smyrna, Georgia
You and I must think alike. I have a lower I picked up and the LPK. Now I need to get it engraved and figure out what upper to start putting together and get the stamp started for that while I wait for my Dobbs can to come back.
 
  • Like
Reactions: Balthaz
PewPewPewCo

PewPewPewCo

Sniper
Mar 23, 2015
2,139
1,075
113
Georgia
Honesty as long as it isn't a slim designed rail it will probably work. primary arms has the inter diameter of most of their cans posted.

If your doing rail recess, then I suggest a direct thread can or something like the Dead Air Armament can which doesn't require you to reach a lever or collar that will be under the tail.
 
  • Like
Reactions: DarthVader
Balthaz

Balthaz

Gone In 60 Seconds
Site Supporter
Kalash Klub
Lifetime Supporter
Mar 26, 2015
5,597
28,961
113
Dallas Ga.
Zip code
30132
Looks like I might get a RRA 2 stage trigger I am not going after 500 Yard shots with this build, but Hey you never know.
I have shot an AR with this in it and it performed OK.
Still Looking at Rails and you guys have given some Great Suggestions and I like Troy, YHM, Seekins, and Odin so far will be hard to decide which one.
As far as Money to spend (I don't want to break the bank but a little is OK).
And the Suppressor suggestions are awesome I like reading about each one.
 
rOmiLaYu

rOmiLaYu

Tracker
Trusted Trader
Mar 25, 2015
656
262
113
Earth
Zip code
30132
I'll third the Seeking rails...particularly the MCSR. As to suppressor, as has been said, true, only subsonic through a .45 can....but you can't shoot .45 through a .30 cal can. Just a thought when it comes to modularity and getting the most out your purchase.

As to stocks, check out the Ergo F93. It counter balances suppressor weight nicely and I like it much better than the UBR (lack of) consistent cheek weld.

As to FCG, I alway prefer a single stage trigger in AR's. Just my preference.
 
  • Like
Reactions: NWS
NWS

NWS

Not a hot midget
Administrator
Lifetime Supporter
Mar 24, 2015
2,468
2,489
113
Georgia
Zip code
30172
Balthaz said:
Looks like I might get a RRA 2 stage trigger I am not going after 500 Yard shots with this build, but Hey you never know.
I have shot an AR with this in it and it performed OK.
Still Looking at Rails and you guys have given some Great Suggestions and I like Troy, YHM, Seekins, and Odin so far will be hard to decide which one.
As far as Money to spend (I don't want to break the bank but a little is OK).
And the Suppressor suggestions are awesome I like reading about each one.
Click to expand...


Every trigger I have ever seen fail on an AR has been a RRA 2 stage. I wouldn't put one in my rifle, but that is just me. Honestly I really like the ALG ACT trigger.
 
  • Like
Reactions: DarthVader
Balthaz

Balthaz

Gone In 60 Seconds
Site Supporter
Kalash Klub
Lifetime Supporter
Mar 26, 2015
5,597
28,961
113
Dallas Ga.
Zip code
30132
rOmiLaYu said:
As to stocks, check out the Ergo F93. It counter balances suppressor weight nicely and I like it much better than the UBR (lack of) consistent cheek weld.
Click to expand...

That Ergo F93 is SWEET will have to really think about that.
Might even get one for my Daniel Defense DDM4
 
Balthaz

Balthaz

Gone In 60 Seconds
Site Supporter
Kalash Klub
Lifetime Supporter
Mar 26, 2015
5,597
28,961
113
Dallas Ga.
Zip code
30132
NWS said:
ALG ACT trigger
Click to expand...
Just Checked that out will give it a Shot I have never had the RRA in mine and will try out the ALG ACT trigger (just Ordered 2).
 
You must log in or register to reply here.
Top Bottom