Handgun Self-Defense Ammunition - Ballistic Testing Data

GA Firing Line

Leshaire

Weekend Warrior
Mar 27, 2015
3,343
1,994
113
Acworth
Zip code
30102
I read that when it first came out and was surprised by a few rounds.

In 9mm:
-The Barnes 115 gr TAC-XPD +P was surprisingly consistent in opening and penetration
-Both of the non 80 grain Corbons as well
-It appears that 147 grain and up is far too heavy for a regular load, and unable to open consistently, or at all... Even the 135 grains that are not a +P have trouble expanding. (Federal 150 gr Micro HST ***NEW*** being the outliar with 5 for 5 opening and expanding nicely.)
-The Federal HST 124 grain are very impressive at .61" avg and 100% of them expanded and went about 18" in
-The Hornady Critical Duty 135 grains were weird because the non +P averaged a deeper penetration than the +P
-L O L at Liberty 50 grain !
-PNW Arms 115 gr Tac Ops SCHP Ive never heard of but were VERY consistent in opening, expansion, and penetration
-Winchester 124 gr Ranger T-Series +P surprised me big time. 124 grains +P seem to typically be the hot tip, but these things didnt expand for shit... Hard pass for me.

What I took from this is that a middle of the road weight with a middle to high velocity is key. Too light and there is no momentum, too heavy and they have a hard time expanding properly, too slow and there is a lack of penetration and again trouble opening and expanding, too fast and were back to trouble opening and expanding. It appears that about a 124gr +P is ideal in this caliber. I didnt care to read about the other calibers...
 
  • Like
Reactions: Jake and Cudruln

cbh13

Millennial Supreme
Lifetime Supporter
Aug 26, 2016
1,545
6,522
113
Auburn
Zip code
30011
I read that when it first came out and was surprised by a few rounds.

In 9mm:
-The Barnes 115 gr TAC-XPD +P was surprisingly consistent in opening and penetration
-Both of the non 80 grain Corbons as well
-It appears that 147 grain and up is far too heavy for a regular load, and unable to open consistently, or at all... Even the 135 grains that are not a +P have trouble expanding. (Federal 150 gr Micro HST ***NEW*** being the outliar with 5 for 5 opening and expanding nicely.)
-The Federal HST 124 grain are very impressive at .61" avg and 100% of them expanded and went about 18" in
-The Hornady Critical Duty 135 grains were weird because the non +P averaged a deeper penetration than the +P
-L O L at Liberty 50 grain !
-PNW Arms 115 gr Tac Ops SCHP Ive never heard of but were VERY consistent in opening, expansion, and penetration
-Winchester 124 gr Ranger T-Series +P surprised me big time. 124 grains +P seem to typically be the hot tip, but these things didnt expand for shit... Hard pass for me.

What I took from this is that a middle of the road weight with a middle to high velocity is key. Too light and there is no momentum, too heavy and they have a hard time expanding properly, too slow and there is a lack of penetration and again trouble opening and expanding, too fast and were back to trouble opening and expanding. It appears that about a 124gr +P is ideal in this caliber. I didnt care to read about the other calibers...

yup lots of interesting info. I was also surprised by those barnes rounds they appeared to do very well. It really just reaffirmed my love for the 124 +p golden sabers which did very well with consistent expansion, makes me happy to have a stock pile and not need to look for something new. I think the hornady issue had to do with as the +p ones were hitting harder they opened up quicker, slowing it down and preventing further penetration
 

Woodstock

Tracker
Jun 29, 2015
529
189
113
Zip code
30012
little surprised by the 147gr hydra shocks but they werent alone as leshaire mentioned. Liked the critical defense
 

cmshoot

Marksman
Jul 12, 2016
1,403
1,710
113
Dallas, GA
Zip code
30132
The test has great data that I will definitely reference when looking at carry ammo, but there is additional criteria you'll need before making a final decision.

For me the additional criteria I'll look at are, in order of importance:
1. Reliable in the weapon I will use it in
2. Flash retardant powder. I don't just go by the manufacturer's statement, I take it out and shoot it at night. There is no industry standard or specifications to meet to declare a load "flash retardant", so some companies' loads are much brighter than others.
3. Reasonably accurate in the weapon I will use it in.
 
  • Like
Reactions: Jake

scand

I like parsley
Dec 15, 2015
290
161
113
Moreland/Newnan
Zip code
30259
I've always purchased 124gr for SD in my 9s. I've never gone full maximum loading as I always consider velocity out of a 4" barrel. My personal choice, and has been for years, is Remington Golden Saber Bonded, now commercially known as "Remington Ultimate Defense".
 

DarthVader

Marksman
Mar 25, 2015
1,175
390
113
Henry County
Zip code
30253
Doctor Gary Roberts has done much more work on this subject and is the leading expert in duty ammo performance and terminal ballistics. I'd put much more faith in his findings than luckygunner. There's nothing wrong with them doing a test like this, per se, but when it comes to actually depending on the ammo, Doc Roberts testing is the culmination of a lifetime in real world application & scientific analysis. But there are a few loads here that overlap with his recommendations.

Sent from my SM-G920V using Tapatalk
 
  • Like
Reactions: Jake

Jake

Steering wheel holder
Super Moderator
Kalash Klub
Lifetime Supporter
Aug 11, 2015
8,361
36,820
113
Ball Ground
Zip code
30189
Doctor Gary Roberts has done much more work on this subject and is the leading expert in duty ammo performance and terminal ballistics. I'd put much more faith in his findings than luckygunner. There's nothing wrong with them doing a test like this, per se, but when it comes to actually depending on the ammo, Doc Roberts testing is the culmination of a lifetime in real world application & scientific analysis. But there are a few loads here that overlap with his recommendations.

Sent from my SM-G920V using Tapatalk

Do you have a link to some of his testing? I could Google it I guess but I'm lazy.
 

DarthVader

Marksman
Mar 25, 2015
1,175
390
113
Henry County
Zip code
30253
I'd have to Google it. It's hosted around the web on a few sites like Lightfighter, m4carbine.net and weapon evolution. Basically, loads like the HST, RangerT, Gold Dots, Critical Defense, Barnes, fall into the ideal category. But that can also vary depending on the bullet weight. For example, Ranger T 147gr performs better than 124 and different critical defense loads do well while others sorta suck. Luckygunner showed similar results. The general criteria are weight retention, integrity of the bullet after firing, expansion and penetration within the defined limits (not too deep & and not too shallow. Also, his tests follow the FBI criteria because his work is focused on federal and local law enforcement agencies. So, his recommendations are based on the above factors, across all barrier types. If one does well through denim, but poorly throughout wallboard and auto glass, it will be low on the recommended list.

In today's world of carjackings and home invasions, I think those are applicable for civilians too and not just LE.

ETA: Google Dr. Gary Roberts or Roberts & Fackler + terminal ballistics
 
Last edited:

DarthVader

Marksman
Mar 25, 2015
1,175
390
113
Henry County
Zip code
30253
yup lots of interesting info. I was also surprised by those barnes rounds they appeared to do very well. It really just reaffirmed my love for the 124 +p golden sabers which did very well with consistent expansion, makes me happy to have a stock pile and not need to look for something new. I think the hornady issue had to do with as the +p ones were hitting harder they opened up quicker, slowing it down and preventing further penetration
The bonded Golden Sabre is a much better bullet than the old Golden Sabre (still available). The original GS has a tendency to shed its jacket.